Home > E-Cig Brands > MOD Kits & Accessories > Variable Voltage/Wattage Mods >

Cloupor T8 150/200W Box Mod



 
Our Price: $119.95
Sale Price: $81.99
You save $37.96!


Availability: Usually Ships in 24 Hours
Product Code: CLPR-150-BOX

Colors

  

qua:  
Description
 

The Cloupor T8 is a powerful 150W box mod with an available firmware upgrade that increases it to 200W. The Cloupor takes dual 18650 batteries. Firmware upgrades for the Cloupor T8 are available at cloupor.com.

Features:
1. Variable wattage from 7W-150W (0.1W increments from 7W to 100W, 1W increments from 100W to 150W)
2. Powered by dual IMR 18650 batteries; output voltage/current: 1.5-7.6V/20A (Max.)
3. Compatible with 0.15ohm~4.0ohm atomizers (0.5-0.8ohm suggested)
4. Magnetic back cover, makes removing the battery convenient
5. IC board comes with self-heat dissipation system
6. Adjustable 510 pin
7. CPU temperature control system
8. OLED display shows battery percentage, watts, ohms, puffs, volts and CPU temperature
9. Instead of screen lock, it can be turned off
10. Micro-USB port for connecting PC
11. Reverse battery protection
12. Aluminum alloy body


Note:
1. This battery CAN'T be charged directly, user have to take out the Li-ion battery out to charge, NO IMR 18650 battery comes with the box mod;
2. This is an advanced mod for advanced users only. Please be aware that this mod requires knowledge of battery safety and technical know-how to work properly;
3. The unit can not be charged through the USB port, which is used for upgrading firmware. Please take them out and charge them via a 18650 battery charger.

Brand: Cloupor
Unit: 1set
Size: Height 102mm; Width 55mm; Depth 25mm

Each set contains:
1 Cloupor T8 150W Box Mod
1 Screw driver
3 Brass connection pins
4 Super magnets
1 Small black box to contain the pins and magnets
1 USB cable
1 Notice card
1 After sell service card
1 User manual

**PLEASE NOTE:
Rebuildable atomizers are for advanced users ONLY! They can only be safely used by one who has knowledge of how to use a multimeter and when a meter must be used, has knowledge of electronics and how they work, and has knowledge about voltage, ohms, resistance, and other electronic knowledge.

NOTES ABOUT REBUILDABLE ATOMIZERS:
  • Rebuildable coils MUST be tested with a meter before it is used. Failure to test a coil can result in damage to the device or user.
  • Wicks/coils that are faulty or built incorrectly WILL BLOW DEVICES. This is a common issue with rebuildable atomizers.
  • Use of rebuildable atomizers voids product warranties with Vape Hut.
  • New coils should be tested and used on an APV that has short circuit protection.
  • Use of rebuildable atomizers is AT YOUR OWN RISK!

Share your knowledge of this product with other customers... Be the first to write a review