The Efest LUC S2 LCD Smart Charger is designed with many high tech features, making it a great choice for charging a variety of batteries and devices. It has two independent slots so that multiple batteries can be charged simultaneously. It also has advanced battery charging programming to protect batteries from short circuit, reverse polarity, over-charge and over-discharge during charging. It includes two USB ports for charging a variety of other devices as well.
0.5A for 14500, 14650., 16340, 16650, 17650, 17570, 18350, 18490, 18500, 18650, 22650, 25500, 26650 batteries
- Mini LCD screen displays precise voltage and battery capacity level
- Each charging channel has independent display of charge status
- Automatically adjust discharge current to charge batteries of different sizes
- Over-discharge, over-charge protection
- Short-circuit Protection
- Automatically stops when batteries are fully charged
- DC Wide Voltage (12-24V) Charging Mode
battery bays can charge 10440, 16340, 14500, 14650, 17500, 17670,
18350, 18490, 18500, 18650, 18700, 22650, 26500, and 26650 lithium
batteries (no spacers needed)
- 1A USB Output: The charge can be used to charge most USB device such as mobile phone, iPad, MP3, MP4, PSP, etc.
- Low Power Alarming:
When discharging consumer electronics, the symbol of battery
discharging will be flashing while the power of battery is lower than
15%, it means battery needs to be charged.
- Built-in Reverse Polarity Protection:
While the charge is connected, each charging channel has reverse
polarity protection, the charger screen will stay blue and static to prevent
from any short circuit, and batteries will not get harmful for reversing
- Zero Voltage Activation Function: When
charger is standby, place over-discharging batteries (battery voltage is
under 2.9V) to charging channel correctly, battery zero voltage
activation starts, since battery over-discharging times, capcacity and
over-discharging degree is different, so the activation time will be
- Over-Charging Protection & Automatically Monitor Charging:
Once the external power is connected with LUC S2 charger, charger will
stop charging when batteries are full; if batteries were not taken off
and the battery voltage will be lower than 4.0V because of many factors,
charger will charge batteries automatically again.
- Can charge at 0.5A, 1.0A or 2.0A current.
1.0A for 16650, 17650, 17670, 18350, 18500, 18650, 22650, 25500, 26650 batteries
2.0A for 22650, 25500, 26650 batteries
- Efest LUC S2 LCD Charger
- Car Charge Plug/Cord
- AC Wall Plug/Cord
- User Manual
- Efest LUC S2 Box
You should not mix the types of batteries you are charging. In other
words, do not charge Li-Ion and Ni-MH batteries at the same time.
understand that there is always a small risk of explosion when using
Li-Ion battery cells, especially in mods, because the batteries are
larger in capacity and many users are not aware of how to properly use
and care for these types of batteries. Even if the charger has
overcharge protection, such as the LUC S2 charger, it is
still recommended that battery charging is monitored and batteries are
removed when charging is complete. DO NOT leave batteries unattended
while charging. If you go to bed or leave for a few minutes, unplug the
charger and remove batteries until you return.
Hut, Inc is not responsible for misuse of Li-Ion cells and chargers. It
is the responsibility of the user to monitor and care for batteries and
WARRANTY: 14 day warranty that applies
for manufacturer defects only. It does not cover abuse, misuse, or normal wear and tear.