 |
The Heatvape Invader is a beast!! It is a variable wattage and variable voltage mod. It can be powered up to 30W and accepts two 18650 batteries in parallel. Operation is touch screen. It uses the advanced USA Microchip 8-bit
PIC® Microcontrollers to ensure its stable performance and safety. It
has a very nice feel, is durable, and has many useful functions such as calendar,
power bank and flashlight.
Parameters
Size of mod: 129.2x60.2x25.7mm
Materials: aluminum alloy and zinc alloy
Variable Voltage: 3.0V-6.0V
Variable Wattage: 3w-30w
Quiescent current: <50uA
Power bank: current 2.1A, voltage 5V
It comes with
1x Invader Mod
1x USB Cable with 4 USB ports
1x Decorative Ring
1x User Manual
Features
1.Touch screen operation
2.Variable voltage/wattage
3.Calander/time setting
4. Emergency flashlight
5. Power bank
6. Low-voltage warning
7. Short circuit warning
Operation Guide
1. Battery assembly: put 2pcs 18650 batteries in the mode and it will power on for self testing.
2.
Start:press the main button 3 times to enter the menu settings mode,
below items will be shown on display: power on/off, voltage mode,
wattage mode, calender and exit menu mode. Press "+" to move cursor
right; press "-" to move cursor left.
3. Turn on/off: move the
cursor to the on/off icon and press the main button to enter boot mode
until the screen shows "POWER ON". It will be powered off after you do
the same operation.
4. 10 Seconds cut off: in the main
interface, press and hold the main button to smoke. Display shows
smoking time. If the time is longer than 10 seconds, the system will
switch off the power and display will show "time over".
5.
Voltage mode: press the main button 3 times to enter the menu settings
mode. Move the cursor to "V" icon and press the main button. Then it
will go to the voltage mode. You can change the voltage by pressing the
"+" or "-".
6. Wattage mode: press the main button 3 times to enter the menu settings mode. Move the
cursor to "W" icon and press the main button. Then it will go to the
voltage mode. You can change the voltage by pressing the "+" or "-".
7.
Calender: move the cursor to the calender mode icon and press the main
button to enter the date and time setting. The screen will show the
exact time, date, month and year. Press the main button to move the
cursor and press "+" or "-" to change.
8. Exit menu: move the cursor to the exit menu icon and press the main button to exit the menu.
9.
Low-voltage warning: if the voltage of the battery is lower than 6.5+/-
0.1V, the display will show "low-voltage" with no output while pressing
"smoking key".
10.Short circuit warning: if short circuit happens on atomizer, the display will show "output short" and stop output.
11.
LED flashlight: turn on the device, flashlight will work or stop work
by holding the button "-" for 2 seconds. (On the main interface, LED
flashlight can not work.)
12 Battery charging
Use micro USB
charger (5v, current >800mA), the screen will show charging bar and
the current capacity status. When the battery is charged full or stopped
charging, the screen will turn off and switch to hibernation.
13.
Power bank:Voltage output = 4.8V-5.2V current output >1.1A. In "turn
on" mode, press and hold "+" for 2 seconds, the power bank will turn on
then charge with short-circuit protection.
Note:
* No 18650 batteries included. You shall purchase separately.
* 510 threaded.
* It comes with multi-ports USB cable, which can be used with your personal devices.
WARRANTY: 30 day for manufacturer defects. Warranty does not cover wear and tear or misuse of the product.
|
|
|
Feed back 
