Noisy Cricket Mod, another innovative design by Jay-Bo, is sleek and elegant in appearance with the body constructed of aluminum alloy finished with a brushed treatment. The fire button located at the top of the unit makes for contact efficiency and easy to find and fire. To power the unit, the Noisy Cricket requires (2) 18650 batteries (batteries not included). To complete the whole set, the Noisy Cricket mod fits seemlessly with the Indestructible RDA by Wismec & Jaybo. The Noisy Cricket is a hybrid mod. The user needs to be aware of safety when using a hybrid mod. Do not use atomizers that are not suited for use with hybrids. Hybrids are intended for use with an RDA atomizer. Do not use them with tanks that have pre-built coils. This may not always be safe.

Specifications:

Elegant & Simple Design
Aluminum Alloy Construction
Brushed Surface Treatment
SMPL Style Firing Button
Top, Threaded Firing Button
510 Threaded
Requires (2) 18650 Batteries (Batteries Not Included)
Batteries Used In A Series Circuit
Recommended Resistance Range: 0.25Ω - 0.5Ω
SMPL Style Button (Button Located At The Top Of The Unit)
Dimensions: 40*22*79mm

Package Contents:

1 x Noisy Cricket Mod by Wismec & Jaybo Designs

Product Introduction

Noisy Cricket Mod, another innovative design by Jay-Bo, is much fashionable in appearance. It looks more classic because of the aluminum alloy body and surface brushed treatment. In addition to the connection in series and high power output, the unique linkage set and ventilation holes design make it even more adaptable and popular.

Cell type: Two 18650 cells
Thread type: 510 thread
Recommended resistance range: 0.25ohm-0.5ohm

Main Features

Changeable Cells Structure: With changeable 18650 cells, it will be much safer and more convenient for users. Its power output depends on the battery level and coil resistance. It is important that the batteries are inserted properly. Never force batteries into the mod. Always check to make sure that the wrappers of the batteries are not damaged in any way and that the battery is free of dents and signs of distress. If a battery wrapper or the battery show any sign of distress, DO NOT use them in this mod. They should be replaced.

SMPL Style Button: The fire button is located in the top of the device, which makes the contact efficiency greatly improved. The insulation ring at the bottom of fire button is used for protection circuit.

Special Linkage Set: The linkage at the baseboard, along with the hybrid adaptor, works well with 510 connectors of different lengths, which greatly increases the suitability of the device.

Bottom Ventilation Holes: The 6 ventilation holes at the bottom of mod body greatly help the device for better heat dissipation.

PLEASE NOTE: Subohm vaping is for advanced users only! Subohm coils must be used with appropriate devices, such as mechanical mods or regulated mods capable of firing subohm coils. When used with mechanical mods, batteries should be 30A or higher. Improper use of this device can lead to serious injury or damage of the device. Please be sure that you are using the device safely. Vape Hut is not responsible for any damage or injury caused by misuse of rebuildable or subohm devices. Please contact us by email or phone if you have questions about the device you are using. You should not use this product if you do not have knowledge of the ohms law. It is also recommended that subohm coils should be used with E-liquids 6mg. or lower for best performance. Higher nicotine strengths will produce a burnt or harsh flavor.

NOTES ABOUT REBUILDABLE ATOMIZERS:

Rebuildable coils MUST be tested with a meter before it is used. Failure to test a coil can result in damage to the device or user.
Wicks/coils that are faulty or built incorrectly WILL BLOW DEVICES. This is a common issue with rebuildable atomizers.

Use of rebuildable atomizers voids product warranties with Vape Hut.
New coils should be tested and used on an APV that has short circuit protection.
Use of rebuildable atomizers is AT YOUR OWN RISK!

WARRANTY: DOA warranty for manufacturer defects. Please contact withing 24 hours if you feel you have received a defective product.