Home > Products > MOD Kits & Accessories > Variable Voltage/Wattage Mods >

iPV4 100W Box Mod
iPV4 100W Box Mod

Alternative Views:

Price: $129.99
Your Price:: $20.00
You save $109.99!

Product Code: PIO4U_IPV4-100W


The iPV4 100W by Green Leaf/Pioneer4You is a small, but powerful box mod. It can fire coils as low as .1 ohm and has variable wattage and voltage as well as temperature control, so it can use kanthal wire coils or nickel wire coils. It is powered by two 18650 batteries and the battery compartment can be opened without a screwdriver. It also features an adjustable brass contact pin so it can be used with a variety of devices easily and has super conductivity.

Features of the iPV4 100W:
  • Temperature control: 212°F-572°F or 100℃-300℃
  • Output wattage: 7-100W
  • Output voltage: 1.0-7.0 V
  • Runs on the YiHi Sx330 V4S chip
  • Powered by dual 18650 batteries
  • OLED screen to show battery level,atomizer resistance,output wattage,output voltage
  • Able to fire coils at 0.1Ω up to 3.0Ω
  • Adjustable Brass contact pin
  • It also has following protections to protect the battery: Low Voltage Protection; Low Resistance Protection; High Input Voltage Warning; Output Short Circuit Protection; Reverse Battery Protection, Locking mechanism to prevent misfire
  • 510 connection
  • Hardware upgrade capability
PLEASE NOTE: The USB port on the device is not for charging. Batteries should be removed from the device for charging. The USB port is only for connection to a computer for hardware upgrades.

Size: Height 108mm;Width 56mm;Depth 23mm

IPV4 100W product includes:
  • One iPV4 100W Box Mod device
  • 1 USB cable
  • 1 Device manual
This mod is for advanced users only. If the iPV4 100W Box Mod is being used with a subohm atomizer, the user should have general knowledge of wattage, voltage, and the Ohms Law to avoid unsafe usage of the device. Use of subohm devices will void all product warranties with Vape Hut.

Mishandling of Li-Ion cells can result in explosion. Vape Hut is not responsible for damage caused by mishandling or mischarging of Li-Ion batteries. Batteries used with this device should be rated 20A or higher, like the Efest 35A. Batteries should never be left unattended while charging and should be charged on a fireproof surface. It is suggested that batteries be charged using a LiPo bag for extra precaution. Battery must be removed from the mod in order to charge.

WARRANTY: DOA warranty for manufacturer defects only. Please contact us within 48 hours of receipt of the product if you feel it is defective.

Share your knowledge of this product with other customers... Be the first to write a review